FAQ

Checking and connecting your GSM phone.

T2S Mobile has been designed to work with any ETSI 07.05 compliant GSM Modem that supports sending and receiving of SMS in PDU mode. See Full FAS for known supported phones and GSM devices

You can connect you phone via Bluetooth, infrared (IrDA), but for speed and reliability we recommend you connect it via a cable.

Please consult you owners manual or the manufacture for further information on how to install your modem drivers. Once you have installed your drivers
go to the contract panel

For WIndows 7 :- Go to Control Panel Control Panel > Phone and Modem options and click on the Modems tab.

You will see your GSM phone on the list and it will show you what COM port the phone is on.

Click to enlarge

You will now need to download our GSM Phone Compatibility Tester, this software will help you make sure your phone is compatible with T2S Mobile and help you gather the configuration settings.

Click to enlarge

Before running the software please make sure your phone has a least 1 SMS message in the inbox so it can be read, the software does not need to be installed, once downloaded un-zip it and run it.

On the left hand side select the COM port your phone is on, band rate (19200 is standard), and click Test Connection
Depending on how you have connected (cable, Bluetooth, infrared) your phone it may take up to 30 seconds before you get a successfully or failed connection message.

If you get connection failed please check that you phone modem drivers are installed correctly, if you are trying a phone that is not on our know list it may not work.

With a successful connection the program will the SMS message in your inbox during reading you will see a messages at the bottom of the program telling you what it is doing, EG “Trying to connect to GSM device”

Error (1006): cannot open com port

If you get the above error make sure the software that comes with your phone or device has not got hold of the COM port. As an example if you were using a Nokia phone you would find a “Nokia Connections Manager” under the control panel, you would need to open this up and un-tick the “Serial Cable connection” (or the method you are trying to connect via), the reason you need to do this it because the Software has got hold of the COM port and you need to release it so other programs (like T2S Mobile) can use that COM port.

Class not registered error

A DLL has not registered correctly during the setup and you need to make the GSM tester register it again.
In the folder where the GSM tester is located you should find the 2 new folder were created. Open up the one called Conf and then open upo the file called t2sconf.ini this should open up on Notepad, and change the following line
DLLReg=1 to DLLReg=0
Now save the file and try again

The final test is to see if you can send a SMS message, sending messages via T2S Mobile, this is used for the prize winner, enter a phone number to send the test message to click on Send Message button Once the message has been sent you will get a pop up saying so, and your phone that you sent the message to should receive it.

If all 3 of the above tests work then congratulations your phone is compatible with T2S Mobile, please remember if you phone is not in our know list of compatible phones please let us know.

Getting you GSM device code

Your GSM device code is in the bottom left hand corner of the GSM Phone Compatibility Tester when you test your GSM device

T2S V4 (2010)

Program Features

Buy Online

Pricing Information

Support

Photos and Vidoes